Author Topic: Como hacer espuma de cualquier jabon  (Read 53117 times)

Offline Teiste

  • Moderador Emérito
  • Trade Count: (0)
  • Supermax Man
  • **************************************************
  • Posts: 1495
  • Semogueiro.
  • Respect: +428
    • www.foroafeitado.com
    • Email
Como hacer espuma de cualquier jabon
« on: December 30, 2009, 04:45:09 am »
0
Este es mi metodo para hacer espuma consistente de cualquier tipo de jabon en pastilla,tanto duro como de glicerina y hacer la espuma o bien en la cara como en un bol.He elegido el jabon de Tabac y una brocha de tejon 24 mm,pero cualquier brocha vale igual,lo unico es que cada brocha carga agua de distinta manera y distinta cantidad y eso siempre hay que vigilarlo para que no nos quede una espuma o muy seca o muy liquida que no nos valdra para un buen afeitado.
En lo que estamos en la ducha ponemos la brocha en remojo con agua caliente.Esto ayuda al pelo a ablandarse y absorver el agua:

Añadimos unas gotas de agua caliente a la superficie del jabon.Esto tambien ayuda al jabon a ablandarse y asi podremos cargar mas jabon con la brocha:

Cuando salgas de la ducha escurre el agua de la brocha,pero no la dejes muy seca:

Quita el agua de la superficie del jabon:

Ahora ya podemos darle un par de vueltas a la brocha cargandola de jabon.Asi se ve despues de tres vueltas:

Asi se ve la brocha cargada de jabon despues de darle 10 vueltas,notese como las puntas se van cargando de jabon:

Y asi se ve despues de darle 20 vueltas.La brocha esta cargada de jabon y vemos que no hay burbujas en la supercifie.Ahora ya podemos hacer la espuma en la cara o bien en un bol:

Si hacemos la espuma en el bol,le retiramos el agua...

...dejando unas gotas en el fondo del bol:

Y comenzamos ha hacer la espuma dando vueltas con la brocha en el bol.Asi se ve la brocha despues de tres vueltas en el bol:

Asi se ve la espuma despues de 15 vueltas...todavia vemos que no es consistente y tiene muchas burbujitas:

Si vemos que necesitamos mas agua le añadimos unas gotitas mas de agua caliente al bol:

Y seguimos haciendo espuma.En un determinado momento notaremos como la espuma casi "explota" y duplica su cantidad...

...y se vuelve como merenge,muy consistente.Con esta espuma es con la que nos afeitamos si queremos obtener los mejores resultados:

Una buena espuma para afeitado es densa como la nata montada y no tiene casi ninguna burbuja de aire:

Asi con esta espuma podremos disfrutar de una lubricacion y acolchamiento para no sufrir esas tan molestas irritaciones y picores que vienen de afeitarse con una espuma muy aguada o demasiado seca.
Como he escrito antes este metodo vale tanto como para jabones tipo glicerina como para pastillas de jabon duro.Espero que esto os ayude a crear una mejor espuma y a disfrutar de vuestros afeitados.

Offline Paulo_s

  • Trade Count: (0)
  • No fio da navalha
  • ***
  • Posts: 27
  • Respect: 0
    • Email
Re:Como hacer espuma de cualquier jabon
« Reply #1 on: December 30, 2009, 02:08:07 pm »
0
Boa, é mais facil do que eu pensava  :D

Offline nogueiraf

  • Trade Count: (0)
  • Fatboy Slim
  • *******
  • Posts: 157
  • Respect: +1
    • Email
Re:Como hacer espuma de cualquier jabon
« Reply #2 on: January 08, 2010, 06:46:55 pm »
0
Fantástico!!

Offline Captain Flint

  • Yo-ho-ho, and a bottle of Bay Rum!
  • Trade Count: (0)
  • Homem de Confiança
  • *
  • Posts: 1695
  • Broguish
  • Respect: +25
Re:Como hacer espuma de cualquier jabon
« Reply #3 on: January 23, 2010, 04:41:26 pm »
+1
Realmente o Tabac é um sabão fantastico e produz uma espuma excelente.
Mas com todos os outros sabões prefiro ensaboar directamente na cara.
Com cremes é todavia mais pratico "trabalhar" a espuma num recipiente.
Ever tried. Ever failed. No matter. Try again. Fail again. Fail better.

Samuel Beckett

Offline lamina

  • Vendedor
  • Trade Count: (+30)
  • Militante do BBS
  • *
  • Posts: 4264
  • Respect: +32
    • The Shave Butler
    • Email
Re:Como hacer espuma de cualquier jabon
« Reply #4 on: January 26, 2010, 11:30:09 pm »
0
Como usaste el bol de la crema catalana tu madre no se va a quedar satisfecha... ;D Excelente post!!As fotos são tudo...

Offline CMur12

  • Trade Count: (0)
  • Numa nice c/ Old Spice
  • ******************
  • Posts: 1310
  • Moses Lake, Washington, EUA
  • Respect: +349
    • Email
Re:Como hacer espuma de cualquier jabon
« Reply #5 on: January 28, 2010, 05:08:46 am »
0
Como usaste el bol de la crema catalana tu madre no se va a quedar satisfecha... ;D Excelente post!!As fotos são tudo...

 :D  ;)


   - Murray

Offline matheuspluz

  • Trade Count: (0)
  • Dia de Derby
  • *****
  • Posts: 79
  • Respect: 0
Re:Como hacer espuma de cualquier jabon
« Reply #6 on: April 04, 2011, 03:57:23 pm »
0
Respodeu algumas duvidas que ainda tinha a cerca de espuma e qualidade da mesma.

Offline cegadede

  • Trade Count: (+5)
  • Lucky Tiger
  • **********************
  • Posts: 2030
  • Respect: +34
Re:Como hacer espuma de cualquier jabon
« Reply #7 on: April 04, 2011, 11:42:20 pm »
0
Pelas fotos, a espuma parece muito "fina", não protetora. Prefiro carregar o pincel por 1 minuto (no começo é bom colocar um relógio pra ter idéia do tempo) e fazer a espuma direto na cara, hidratando-a aos poucos através de rápidos mergulhos das pontas do pincel em água.
Meu sabão atual é o Provence Santé Green Tea (desde 21/09/2015), usar-lo-ei exclusivamente até o seu término.

Offline Islander

  • Trade Count: (+1)
  • Lucky Tiger
  • **********************
  • Posts: 2196
  • Respect: +9
Re:Como hacer espuma de cualquier jabon
« Reply #8 on: April 06, 2011, 09:45:04 pm »
0
Pelas fotos, a espuma parece muito "fina", não protetora. Prefiro carregar o pincel por 1 minuto (no começo é bom colocar um relógio pra ter idéia do tempo) e fazer a espuma direto na cara, hidratando-a aos poucos através de rápidos mergulhos das pontas do pincel em água.

+1, talvez não 1 minuto mas acima do que vejo ser a norma.
Porém, não uso pincéis XXXL....   ;) :D
5$ de desconto com iHerb referral code: GOM606

Offline matheuspluz

  • Trade Count: (0)
  • Dia de Derby
  • *****
  • Posts: 79
  • Respect: 0
Re:Como hacer espuma de cualquier jabon
« Reply #9 on: April 06, 2011, 09:53:43 pm »
0
Pelas fotos, a espuma parece muito "fina", não protetora. Prefiro carregar o pincel por 1 minuto (no começo é bom colocar um relógio pra ter idéia do tempo) e fazer a espuma direto na cara, hidratando-a aos poucos através de rápidos mergulhos das pontas do pincel em água.

Testei ontem esta tecnica, com o Granado de menta, que e muito dificil fazer espuma. Na verdade um dia antes, cortei o granado em cubos, derreti em banho maria, misturei um pouquinho de agua para amacia-lo pois e bem duro, e deixei-o em um pote(bow), no dia seguinte testei a tecnica, porem tive que carregar o pincel quase 1 min, (girando ele em seu proprio eixo achei mais eficaz do que com movimentos circulares), mas finalmente consegui uma bela espuma, com bolhas minusculas, e bem acolchoada, esta literalmente macia ao apertar com os dedos.
« Last Edit: April 06, 2011, 10:18:36 pm by matheuspluz »

Offline Vitor

  • Trade Count: (0)
  • Vigorosamente Floïd
  • *************
  • Posts: 641
  • Respect: +1
    • Email
Re:Como hacer espuma de cualquier jabon
« Reply #10 on: June 29, 2011, 12:53:35 am »
0
Ja tinha visto no youtube  ;D ;D ;D

Offline ischiapp

  • Trade Count: (0)
  • Lucky Tiger
  • **********************
  • Posts: 2166
  • True BBS
  • Respect: +1923
    • Pierpaolo's G+
    • Email
Soap Lathering: First Stage - The Load of the Brush
« Reply #11 on: July 02, 2015, 08:19:06 pm »
0
I read quite often difficulties to produce dense and full-bodied foam.
Normally indicted on duty soap.
But there are those who blames to the brush, or water hardness.
Instead going to see, the problem is in the first step ... the most important and fundamental ... of assembly: the load.

Today (see SOTD) I had on loan this brush from my friend Vicenzo, whom I thank.
As you can see the size is medium, and the fibers are very sweet ... the edge of the floppy. And especially they have the tendency to open to groups when wet, so it has a load capacity minimally not comparable to a tuft which has an important backbone.

After trying almost all kinds of formulations, and industrial that artisanal, I developed a love for hard soaps which I think is more effective and efficient. This is because normally more concentrated on those technical and active components that give mechanical and functional results to foam. With obvious benefits in comfort after shaving and durability as the instrument. And overall, in the general economy.
But this love bloomed very slowly, having had as many people bad experiences with some of my products.
You can read thousands of posts online about the difficulties that users are using the Mystic Water or Mitchell's Wool Fat, but also the Cella and in general all those simple, rich and natural soaps. In a word ... excellent. But like many of the best things in life, they are appreciated with the experience.
This is mine. It works well for me.

Now for all the soaps (except those that use in stick mode ... another trick simple and efficient !!) the loading phase is standard:
1. I put to soak the brush in warm water and add a layer of the same on soap
2. I leave working for the time to prepare shaving, given that the preshave treatment is just as important
3. Drain completely the brush of excess water, leaving only the little captured by the fibers
4. Without throwing the veil of water on the soap (a soup spoon, about 10ml) ... that has softened and especially has run loaded soap ... start to charge the soap
5. The loading phase takes several tens of seconds, until obtaining a thick foam, and almost without bubbles (see picture 1)
6. I capture all this initial foam (proto foam) with the brush (see photo 2)
7. Rinse the soap and the container and I put them to drain for the time of the rite (see picture 3)
8. Start the real assembly phase.

The mounting method is indifferent, having laid a solid foundation to building a rich lather and gorgeous.
Personally I prefer the mounting on face (or face lathering FL).
Equally valid, and some brushes even better, it is fitting in the bowl (or bowl lathering BL).
And do not forget the little known but very efficient mounting in the palm of your hand ("Load & Hydrate" or LH)
After the shave of today, given the challenge POP alias Provember One Pass, remained to me a lot of foam in the clump.
To see the quality foaming (exceptional) of the synthetic Omega new champion, I kept exploiting the LH method.
Continuing to wet the tips (drips!!) and with a fair amount of elbow grease, the result is clear. (see foto4)
Practically with a good load of a great soap with a magnificent brush, I could shave full-body whole family ... including the dog.
And the best part ... as they say, the icing on the cake ... is the duration of that foam delicious like whipped cream.
Set aside in the soap dish, all that froth has remained intact until the moment to leave the house. More than thirty minutes later. (see foto5)
And despite everything, it was still so compact to support its weight and also that of the plastic shell of the soap dish. (see foto6)

Not bad ... for a cheap brush, tough soap and opalescent lime water!!







Onde há um grande desejo, não pode haver grande dificuldade - Maquiavel
O tradutor fala por mim. Saudações de Ischia, Pierpaolo @ ischiapp.blogspot.com

Offline JLTG

  • Aspirante a ajudante de auxiliar de aprendiz
  • Moderador Emérito
  • Trade Count: (+6)
  • D.Quijote de La Toja
  • **************************************************
  • Posts: 11138
  • Respect: +26
    • Email
Re: Como hacer espuma de cualquier jabon
« Reply #12 on: July 06, 2015, 03:39:22 pm »
0
Concordo com o José Pinteiro. O carregamento foi deficiente. Eu, após adotar mais tempo de carga, por sugestão de alguns confrades, tenho obtido resultados muito melhores.
José Luís Tomé Gonçalves

“Elogie em público e corrija em particular. Um líder corrige sem ofender e orienta sem humilhar." - Mario Sergio Cortella

“Se cortar, espirra sangue!” - José Luiz da Costa Gonçalves

Offline billy

  • Trade Count: (0)
  • Casca DOVO
  • **
  • Posts: 19
  • Respect: 0
Re: Como hacer espuma de cualquier jabon
« Reply #13 on: September 03, 2015, 04:36:43 am »
0
Esse sabonete faz uma quantidade de espuma absurda! Na próxima barba vou testar!
"Em alguns instantes sou pequenino e também gigante.
Só não se perca ao entrar no meu infinito particular"

Offline NoName

  • Trade Count: (+1)
  • Grogue por Semogue
  • ******************************
  • Posts: 3704
  • (Portugal*Lisboa)
  • Respect: +624
Re: Como hacer espuma de cualquier jabon
« Reply #14 on: September 03, 2015, 02:52:14 pm »
0


Concordo com o José Pinteiro. O carregamento foi deficiente. Eu, após adotar mais tempo de carga, por sugestão de alguns confrades, tenho obtido resultados muito melhores.

Concordo contigo e até por tua sugestão
tambem adotei como forma de fazer as
espumas , carregar mais tempo e deixar
com mais densidade.
Mas há espumas que embora mais
fracas e areadas ainda conseguem
um bom desempenho ... dou como
exemplo o Maca Root .
Mas para resultadis maximos as espumas devem ter corpo e densidade.
"A solução dos seus problemas não é  dinheiro, políticos ou o
governo...É conhecimento compartilhado!"        " Ton Gadioli"


Tags:
 

SimplePortal 2.3.5 © 2008-2012, SimplePortal